Precautions for selecting battery tape

Currently on the marketBattery TapeThere are many types of adhesive agents on the surface, so the performance and strength of different brands of adhesive tapes are also different. Therefore, in the process of purchasing battery adhesive tapes, some basic elements should be considered, such as the microporosity of stickers and the viscosity of adhesive tape surface.

Due to the appearance of the adhesive effect of the battery tape, the moisture of the adhesive agent on the surface of the battery tape penetrates into the adhesive after the tape is connected, and the inside dries rapidly, thus making the battery tape a part of the object to be adhered. Therefore, the microporosity of the surface of the bonded object is very important in the selection of battery adhesive tape. If the pasted article has more micropores and better hygroscopicity, mucous membrane agent and battery adhesive tape that can quickly coagulate should be used at this time. Otherwise, if the speed is too slow or the adhesive tape with more adhesive agents, the effect is not good.

The mucous membrane agent on the surface of the battery tape is applied on the belt, usually after drying out and then finishing into a roll. If the tape itself is relatively wet, it will make them stick to each other, which is difficult to open during use, and some tapes cannot be used directly.

The common packaging tape used in our daily life is a daily product, but due to the large number of manufacturers, the technology is usually uneven, so when choosing battery tape, we must choose according to two criteria, one is the initial adhesive force, the other is the durability, the two are often proportional, generally speaking, the adhesive tape is due to its glue application area is relatively small, usually only about 25 microns.

How to distinguish between good and bad for colored battery tape? For colored battery tape, it is generally yellow and yellow. Pinch the adhesive tightly and then pull it apart quickly. You can pull off one side of the adhesive and you can see the purity and transparency of the original film. You can also look at the thickness of the glue. If no glue is pulled away or pulled away in dots, there are a lot of impurities in this glue, and the glue has no cohesion. Second, there is too much water and it has volatilized. At this time, the initial adhesive force of this adhesive tape has decreased greatly, and the hand feeling can be distinguished. In fact, there are many ways to distinguish between good and bad tape, as long as you pay more attention to life, you can distinguish between good and bad tape.

DueBattery TapeIt is sticky in itself. If it is not used in electricity, but used in other aspects, such as the surface of objects such as walls, it is easy to bring down some other substances. At this time, you can use a steam iron to iron it, which will reduce the stickiness of the battery tape. At this time, you can tear it off with a gentle tear.