How do we choose battery tape? Let's understand

　　Battery TapeHow do we choose? Let's understand.

At present, there are many types of battery tapes on the market, and there are many types of adhesives on the surface. So different brands of tape performance and strength are not the same. Therefore, in the process of purchasing battery tape, some basic elements should be considered.

The adhesive effect of the battery tape is that after the tape is connected, the moisture of the adhesive on the surface of the battery tape penetrates into the adhesive, and the inside dries quickly, so that the battery tape becomes a part of the object to be glued. Therefore, the micropores on the surface of the adhesive object are very important in the selection of the battery belt. If the pasted object has more micropores and better moisture absorption, it is necessary to use adhesives and battery tapes that can quickly condense at this time, otherwise the tape with too slow speed or more adhesives is not effective.

The adhesive on the surface of the battery tape is coated on the tape, usually after the tape is completely dry, and then rolled up. If the tape itself is wet, it will make them stick together, it is difficult to open during use, and some tapes cannot be used directly.

The ordinary packaging belts used in our daily life are daily necessities, but because of the many manufacturers, the technology is usually uneven. So in the choice of battery tape, we must choose according to two criteria, one is the initial adhesion, one is the durability, the two are often proportional. In general, the tape is due to its small area, usually only about 25 microns.

How to distinguish the color battery tape is good or bad? For color battery tape, yellow and khaki are generally more. Squeeze the glue tightly and pull it apart quickly, so that the glue on one side can be pulled apart and the purity and transparency of the original film can be seen. You can also see the thickness of the glue. If there is no glue to be pulled apart or point-like, one is that there are a lot of impurities in the glue, and the glue has no bonding force. Two is too much water, has evaporated. At this time, the initial adhesive force of this tape has dropped sharply, and the hand can be distinguished. In fact, there are many ways to distinguish between good and bad tapes. As long as you pay more attention in your life, you can tell whether the tape is good or bad.

Because the battery tape itself is sticky, if it is not used in electricity, but used in other aspects, such as wall surface, it is easy to bring down some other substances. At this time you can gently tear it off.

I believe that through the above introduction, everyone isBattery TapeThe purchase also has a certain understanding. If you want to know more about the battery tape, you can contact us. We are a manufacturer of battery tape and have many years of experience in this industry.