Mara tape wholesale: mara tape in the use of what are the precautions?

　　Marla tape wholesaleMara tape, also known as fire cow tape, silicone Mara tape, etc. Mara tape is a high temperature resistant, high pressure flame retardant insulating single-sided tape made of polyester film, also called polyester insulating tape.

Mara tape wholesale: polyester film as the substrate and acrylic polymer as the adhesive can effectively prevent the protected object from being eroded by chemicals. Its weather resistance, temperature resistance 130 ℃, good insulation performance, flame retardant, voltage resistance.

mara tape wholesale: mara tape in the use of what are the precautions?

1. Mara tape should be placed in the warehouse to avoid sun and rain. Do not contact with organic solvents such as acid, alkali and oil. Keep it clean and dry. The distance to find the equipment is 1 m, and the normal temperature is -15~40 degrees.

2. Mara tape shall be placed in rolls. Storage time to be turned over quarterly.

3. When transporting the conveyor belt, use a crane and lift it with beam equipment to avoid damage to the conveyor belt. Do not load and unload the conveyor belt at will, causing loose rolls and sleeves to fall off.

4, Mara tape types and specifications according to the needs and specific conditions of use, for reasonable selection.

5, do not use different types, specifications, models, strength, number of matches.

6. The joint of the conveyor belt should be bonded by hot vulcanization to increase reliability and maintain high effective strength.

Marla tape wholesale: Marla tape how to use

Tape is widely used in various types of electrical and electronic components insulation and dressing. High voltage isolation between switching power supply enclosures, etc. It is also used to buckle soft pack lithium battery, combat, etc. to achieve fixed, insulation and fire prevention effect.

　　Marla tape wholesale: Mara tape storage and use is very important

1. Mara tape should be stored in the warehouse to avoid sun and rain. It is strictly prohibited to contact with organic solvents such as acid, alkali, oil, etc., and keep it clean and dry. Except for the 1M device, the room temperature was-15C to 40C.

2. Mara tape shall be placed in rolls. Storage time should be reviewed quarterly. Marla tape for anti-static floor

3. When loading the conveyor belt, the effect of using a crane is good. Use a mount crane with a beam to avoid hurting one side. Do not install laterally and cause loose rolls to throw the sleeve.

4, mara tape types and specifications according to the use of requirements and specific circumstances, for reasonable selection.

5, do not use different types, specifications, strength, layers of materials.

6, the use of hot vulcanizate to increase reliability and maintain high effective strength.

7. The depth of the conveyor drive roller is large, and the belt diameter of the conveyor is very small to meet the relevant regulations.