Mara tape manufacturers: mara tape of relevant knowledge.

　　Marla tape manufacturers: Mara tape related knowledge.

mara tape manufacturers: mara tape with high temperature resistance, high pressure resistance, good insulation properties, flame retardant and other characteristics. Commonly used in transformers, motors, capacitors and other motors, electronic resistors insulation wrapping.

Mara tape features: polyester film as the base material, acrylic polymer as the adhesive, can effectively prevent the protected object is chemical corrosion, strong weather resistance, temperature resistance of 130 degrees, insulation, flame retardant, pressure resistance.

Color: light yellow, dark yellow, blue, red, green, black, white, transparent, etc.

Substrate: Polyester film

Thickness: 0.06mm,0.08mm, etc.

Width: 0-500mm

Length: 66 m

Temperature resistance: 130

Peel strength: 250N/M

Breakdown voltage: 5.5 kV

Electrostatic coefficient: 1.0

Flame retardant grade: 94V-0

Excellent solvent resistance.

Mara tape manufacturers: Mara tape is widely used in transformers, motors, capacitors and other electrical and electronic components of the insulation and dressing. and switching power supply enclosure for high voltage isolation. It is also used to bundle soft-pack lithium batteries, such as between the protection board and the battery core, to play the role of fixing, insulation and fire prevention.

Mara tape is widely used for insulation and wrapping of various motors and electronic components such as transformers, motors, capacitors, etc. and switching power supply enclosure for high voltage isolation. It is also used to bundle soft-pack lithium batteries, such as between the protection board and the battery core, to play the role of fixing, insulation and fire prevention.

We should pay attention to the use of Mara tape:

1. Mara tape should be stored in the warehouse to avoid sun and rain; do not touch acid and alkali oil organic solvents, keep it clean and dry, 1 meter away from the discovery device, and the room temperature is between -15 and 40.

2. Mara tape should be placed in rolls, not folded, and should be turned over once a quarter when stored for too long.

3. When loading and unloading the conveyor belt, it is better to use a crane and use a rigging with a beam to lift it smoothly so as not to damage the belt edge. Do not load and unload the conveyor belt at will, which may cause the roll and sleeve to loosen.

The type and specification of Mara tape should be reasonably selected according to the use needs and specific conditions.

5. Do not connect (match) Mara tapes of different varieties, specifications, models, strength and cloth layers together.

6. The conveyor belt joint is good to use hot vulcanization bonding to improve reliability and maintain high effective strength.

7. The diameter of the conveyor roller and the diameter of the small pulley of the conveyor belt should meet the relevant regulations.

8. Do not make the Mara tape crawl or crawl, but keep the traction roller and vertical roller flexible, and the tension should be moderate.

9. When the conveyor is equipped with baffles and cleaning devices, the tape should be avoided.

10. Cleaning is the basic condition for Mara tape to run well. Foreign matter will affect the eccentricity, tension difference and even fracture of the tape.

We areMarla tape manufacturersIf you want to know more, you can contact us.