Marla tape some knowledge points, retaining wall tape manufacturers tell you

Retaining wall tapeThe manufacturer thinksMara tape is a high temperature and high pressure flame retardant insulating tape, made of polyester film coated with acrylic polymer pressure sensitive adhesive. It has the characteristics of high temperature resistance, high voltage resistance, good insulation performance, flame retardant, etc., and is commonly used in the insulation package of transformers, motors, capacitors and other motors and resistors. Mara tape common colors are: light yellow, dark yellow, blue, red, green, black, white, transparent and so on.

Retaining wall tape manufacturers believe that Mara tape is widely used for insulation wrapping of transformers, motors, capacitors and other motors and electronic components, as well as high-voltage isolation between motherboard circuits and switching power supply housings. It is also used as a dressing for flexible packaging lithium batteries. If it is wrapped between the protective plate and the battery, it plays the role of fixing, insulation and fire prevention. Because its winding transformer insulation is very good, it is also called winding insulation tape. 0.05mm breakdown voltage is higher than the thickness of 3.5KV, the greater the breakdown voltage is higher. The commonly used thickness is 0.05mm,0.08mm,0.11mm (double layer), the viscosity is about 4N, and the viscosity can also be customized.

Retaining wall tape manufacturers believe that mara glue with sticky and non-sticky. Adhesive Marla tape is based on polymer film, coated with a layer of glue. Most of the Mara tape base layer bears the chemical and mechanical effects of the surrounding medium on the insulating layer, has high electrical insulation properties, and protects the pipeline from corrosion. In addition to the above functions, it also promotes the retention of the insulating layer on the protected metal surface, resulting in the tightness of the overlap between the layers of the Mara tape. On the self-adhesive tape, the self-adhesive layer of a certain composition coated on the film base layer can be combined with the special primer coated on the pipe to play a major protective role.

Retaining wall tape manufacturers believe that the use of Mara tape:

1. Mara tape should be stored in the warehouse to avoid sun and rain; do not touch acid and alkali oil organic solvents, keep it clean and dry, 1 meter away from the discovery device, and the room temperature is between -15 and 40.

2. Mara tape should be placed in rolls, not folded, and should be turned over once a quarter when stored for too long.

3. The manufacturer of the retaining wall tape believes that when loading and unloading the conveyor belt, try to use a crane and use a rigging with a beam to lift it smoothly so as not to damage the belt edge. Do not load and unload the conveyor belt at will, which may cause the roll and sleeve to loosen.

The type and specification of Mara tape should be reasonably selected according to the use needs and specific conditions.

5. Do not connect (match) Mara tapes of different varieties, specifications, models, strength and cloth layers together. Mara Tape Manufacturer-Jiatai Packaging

6. Retaining wall tape manufacturers believe that the conveyor belt joints should be bonded by hot vulcanization as much as possible to improve reliability and maintain high effective strength.

7. The diameter of the conveyor roller and the diameter of the smaller pulley of the conveyor belt should meet the relevant regulations.

8. Do not make the Mara tape crawl or crawl, but keep the traction roller and vertical roller flexible, and the tension should be moderate.

9. Retaining wall tape manufacturers believe that when the conveyor is equipped with a baffle and cleaning device, the Mara tape should be avoided.