Guangdong Mara Tape Manufacturer: Introduction of Mara Tape Storage and Transportation

Release time:

2020-07-15

Guangdong Mara Tape Manufacturer: The storage and transportation of Mara Tape are introduced. 1. The tape should be stored in the warehouse to avoid sun and rain. It is strictly prohibited to contact organic solvents such as acid, alkali and oil, and keep them clean and dry. 1 meter away from the discovery device, the room temperature is between -15 and 40. 2. Mara tape shall be placed in rolls and shall not be folded. When the storage time is too long, it shall be turned over once every quarter. 3. When loading and unloading the conveyor belt, it is best to use a crane and use a rigging with a beam to lift it smoothly to avoid damage to the edge of the conveyor belt. Do not load and unload at will, which may lead to loose rolls and loose sleeves.

　　Marla tapeIntroduction to storage and transportation

1. The tape should be stored in the warehouse to avoid sun and rain; it is strictly prohibited to contact organic solvents such as acid, alkali, oil, etc., and keep it clean and dry. 1 meter away from the discovery device, the room temperature is between -15 and 40.

2. Mara tape shall be placed in rolls and shall not be folded. When the storage time is too long, it shall be turned over once every quarter.

3. When loading and unloading the conveyor belt, it is best to use a crane and use a rigging with a beam to lift it smoothly to avoid damage to the edge of the conveyor belt. Do not load and unload at will, which may lead to loose rolls and loose sleeves.

The type and specification of the tape should be reasonably selected according to the needs of use and the specific situation.

广东玛拉胶带生产商

5. It is not allowed to connect (match) tapes of different varieties, specifications, strength and cloth layers.

6. Marla belt conveyor belt joints should be bonded by thermal vulcanization to improve reliability and maintain high effective strength.Guangdong Mara Tape Manufacturer

7. The roller diameter and the minimum pulley diameter of the conveyor belt shall comply with relevant regulations.

8. Do not make the tape snake or creep, but keep the traction roller and vertical roller flexible, and the tension should be moderate.

9. When the conveyor is equipped with baffles and cleaning devices, the wear of the Mara tape should be avoided.

10. Cleanliness is the basic condition for the good operation of the tape. Foreign matter will affect the eccentricity, tension difference and even fracture of the tape.Guangdong Mara Tape Manufacturer

11. If the Mara tape is damaged early during use, the cause must be found out and repaired in time to avoid adverse consequences.

Key words:

Introduction of characteristics of retaining wall tape

Guangdong Mara Tape Manufacturer

Introduction of characteristics of retaining wall tape

Guangdong Mara Tape Manufacturer