High temperature green tape: application field characteristics and use method

High temperature green tape, that is, tape used in high temperature working environment. Mainly used in the electronics industry. High-temperature green tape is usually used for painting, baking leather processing, coating and covering, fixing in the manufacturing process of electronic parts, printed circuit boards and high-temperature processing coverings. So what are the advantages of high temperature green tape in the field of high temperature tape?

The high temperature resistance of high temperature green tape is very good. Not only that, high temperature green tape also has stronger corrosion resistance and high pressure resistance. Many people would think that this high-temperature resistant adhesive product, if used at high temperatures, will be removed and will leave a sticky residue in the place of use? The answer is no. No glue residue is a big advantage of high temperature raw tape, so we can use it safely in high temperature or room temperature environment.

High temperature green tape has excellent high temperature resistance, and has strong corrosion resistance and high pressure resistance. High temperature green tape is mainly used in some electronic products, automotive industry, paint and other high temperature mask industries. So these industry friends, do you know how to properly use high temperature green tape?

1. High-temperature green tape coating: The repair agent is composed of two components A and B. When using, strictly follow the specified ratio, the main agent A and curing agent B are fully mixed until the color is uniform, and the remaining glue will not be used again after the specified time is used.

2. High temperature green tape Apply the mixed repair agent on the surface of the treated substrate, apply uniform force when applying, and then press repeatedly to ensure that the material is in full contact with the surface of the substrate to obtain better results. When multi-layer coating is required, the surface of the original coating should be treated before coating;

If you use high temperature resistant glue for potting, it should be cured at room temperature for 24 hours after potting to remove bubbles, and then enter the high temperature oven to cure at 100°C, the effect will be better. If it cannot be cured at high temperature, it will take 7 days to completely cure at room temperature, and the effect is not as good as high temperature.

3. When the temperature is lower than 25 ℃, the curing time can be appropriately extended. When the temperature is lower than 15 ℃, please use an appropriate heat source for heating (infrared, electric furnace, etc.), but do not directly touch the repaired parts during the heating process. The correct operation of the high-temperature green tape is to keep the heat source at a temperature of 60~80 ℃, at least 40cm away from the repair surface, and keep it for 2~3 hours.