Marla Tape: Concept Analysis and Characteristics Introduction

Release time:

2020-09-07

Mara tape is a high temperature and high pressure flame retardant insulating tape, made of polyester film (PET film) and coated with acrylic polymer pressure sensitive adhesive. The mala glue produced by our factory comes in light yellow, dark yellow, red, blue, green, black, white, transparent and other colors. Polyester film tape has high temperature resistance, high pressure resistance, good insulation performance and flame retardancy. It is usually used to insulate and wrap various motors and electronic resistance components, such as transformers, motors, capacitors, etc., also known as polyester insulating tape.

The main use of Mara tape:

Suitable for insulation fixation of various motors and electronic components, such as transformers, capacitors, relays, voltage regulators, motors, etc., including motor stator coils, motor coil fixation, power transformer coil wrapping and external insulation.

Mara tape is adhesive and non-adhesive. Mara tape uses a polymer film as the base layer, and a layer of adhesive is applied to it. The adhesive tape is made of adhesive tape and imported adhesive tape ("RonifxeH" and "HHTTO", etc.).

The base layer of the Mara tape mainly bears the chemical and mechanical effects of the surrounding medium on the insulating layer, and has high electrical insulation properties and protects the pipeline from damage. "In addition to the above functions, the adhesive layer on the falling film surface can also promote the retention of the insulating layer on the protected surface of the metal, thereby sealing the overlap between the layers of the Mara tape. -Tape (such as "IInaaxo On small nexc"), the non-adhesive layer of a certain composition applied to the base layer of the film can be used in combination with a special primer applied to the pipe to play the main protective role.

According to the physical characteristics of Mara tape, the surface of the pipe must be preheated before winding the tape. Polyethylene type, one is silicone rubber type. There are two types of JI3TCAP-JIIIT tape, namely}(A "type and B burning type), which are used for corrosion protection of heat pipe sections with a pipe temperature of up to 120°C. Two layers (bearing layer and insulating layer), each layer has different strength index.

Key words:

Mara tape: use and precautions

High temperature green tape: application field characteristics and use method

Mara tape: use and precautions

High temperature green tape: application field characteristics and use method