Retaining wall tape dry goods small knowledge

Release time:

2020-11-05

Retaining wall tape, also known as non-woven tape, is made of polyester film composite non-woven fabric as the base material coated with acrylic adhesive or rubber adhesive, and has good pressure resistance, high temperature resistance, solvent resistance and inherent adhesive properties of the adhesive. The retaining wall tape is suitable for insulation cladding of transformers, motors, capacitors and other motors and electronic resistors. The color is generally brown and white.

Retaining wall tapeAlso known as non-woven tape, it is made of polyester film composite non-woven fabric coated with acrylic adhesive or rubber adhesive. It has good pressure resistance, high temperature resistance, solvent resistance and inherent adhesive properties. The retaining wall tape is suitable for the insulation package of various motors and electronic resistors such as transformers, motors, capacitors, etc.Re.Colorgenerally haveBrownandWhitetwo kinds.

GeneralThe surface of the tapeWill beIt is coated with an adhesive to attach the tape to the object. The original adhesives came from animals and plants, inIn the 19th century, rubber was the main component of adhesives. Various polymers are widely used in modern times.

ButExistingRetaining wall tapeWhen in use, the width is often fixed, and it is very inconvenient to adjust its own width, which brings great waste and economic losses. Due to the exposure of the tape, there isRetaining wall tapeThe problem of viscosity decline,So,High viscosityRetaining wall tape products have also been slowly put into the market in recent years..

The new type of retaining wall tape is fixed with a load-bearing roller on the inner side of the main body and a high adhesive tape on the outer side.Retaining wall tape, It is a trimming bracket with a second fixing frame with a fastening spring fixed on the trimming bearing frame, a width adjustment frame, and a non-adhesive roller, and a first fixing clip is fixed on the other side of the bottom..

A non-adhesive roller is fixedly provided on the inner side of the trimming bracket, a width adjustment frame is fixedly provided on the top of the trimming bracket, and the width adjustment frame is fixedly provided with a cutting blade at the bottom of the supporting edge seat. A supporting blade seat is fixedly provided on one side of the blade seat, and adjusting nuts are provided on both sides of the width adjustment frame.

Refer to for an explanation of insulationandStandard for electrical clearance and creepage, retaining wall tapeInsulation must be strengthened. In order to ensure the distance along the surface of the product, when there is a high voltage between the primary segments, install shields at both ends or part of the windingRetaining wall tapeIt is a measure to prevent electricity from damaging the copper wire paint through the gap between the winding edge and the skeleton.

Key words:

Retaining Wall Tape Detail

Wall Tape: Details and Description and Standards

Retaining Wall Tape Detail

Wall Tape: Details and Description and Standards