Mara tape wholesale: how should we choose tape

The tape has good corrosion resistance, oil stain resistance and insulation characteristics, and plays the role of binding, wear resistance, insulation, flame retardant, noise reduction, marking, etc. Tape winding is a basic and commonly used protection method for wiring harnesses. The entire wiring harness needs to be fixed and formed with tape. The winding method can be divided into full winding, partial winding and flower winding according to the protection level of the wiring harness.Marla tape wholesaleThere are commonPVC tape, high temperature resistant PVC tape, polyester cloth tape, flannel tape, sponge tape, etc.

The characteristic parameters of the tape are determined by the material and manufacturing process of the tape itself, and the quality cost of the tape is different for different characteristic parameters, I .e. the price advantage of the tape is different. Therefore, Mara tape wholesale recommends that two factors must be considered when choosing tape to ensure both quality and price requirements. One is that the performance meets the requirements, rather than far exceeding the requirements; the other is to choose regular tape as much as possible to avoid special tape;

1. Tape of engine wiring harness and engine room wiring harness

Polyester cloth tape is the tape for engine wiring harness and engine room wiring harness, but due to its high price, it is usually only used in local positions on the wiring harness. So,Marla tape wholesaleThe engine wiring harness and engine compartment wiring harness generally adopt common temperature-resistant ones.PVC tape, special parts only use flannel tape or polyester-based tape.

2. Tape of instrument panel harness and four-door harness

The working environment of the instrument panel wiring harness and the four-door wiring harness is relatively stable, ordinaryPVC tape can meet the requirements. When the wire harness is in direct contact with the hard material, but the part cannot be completely fixed, the local use of flannel tape, polyester tape, felt tape, and sponge tape for buffering, shock absorption, sound absorption, and noise reduction.

In addition, in order to facilitate on-site loading, Mara tape wholesale suggests that tapes of different colors can be selected for local winding, and tapes of different colors can also be selected for local marking when there are multiple stocks for the same vehicle type, which provides convenience for visual management of loading site.

3. Tape of floor harness and ceiling harness

The floor sling is placed under the interior of the floor, and the working environment is relatively stable. Its requirements for tape are not very high, ordinaryPVC tape can fully meet the requirements. Only when connected to the movable seat, the connecting parts need to be wrapped with some wear-resistant flannel tape.

4. Tape for other wire harnesses

ABS and EPB wiring harnesses are safety elements. The working environment near the four-wheel speed sensor is more complicated. It is more reasonable to choose flannel tape or polyester-based tape when choosing tape. Airbag harness and seat belt harness are special components,Marla tape wholesaleGeneral use of high temperature resistance85 yellow PVC tape, white PVC tape can be used as a mark on the harness.