Mara Tape: Effect of Temperature on Tape Application

Release time:

2021-01-04

With the change and improvement of people's consumption demand, people have certain requirements for tape. However, the use of adhesive tape shows different product characteristics under different environmental conditions. Mara tape manufacturers to give you a brief introduction below.

With the change and improvement of people's consumption demand, people have certain requirements for tape. However, the use of adhesive tape shows different product characteristics under different environmental conditions. BelowMarla tapeManufacturers give you a brief introduction.

Mara tape in the case of high temperature without any external force, the useTape below 70 degrees will not have much impact, but its peel strength will be reduced, and as the temperature increases, the holding force of the tape will be significantly reduced; however, the tape at zero degrees will freeze. In this case, if it vibrates, the frozen adhesive tape will be separated from the substrate adherend.

Marla tapeThe adhesive effect is caused by the penetration of the adhesive on its surface into the adherend and rapid drying, which makes the tape part of the adherend. Therefore, the microporosity of the adherend surface is very important for the selection of the tape. If there are more micropores or more hygroscopicity, you must use a tape with faster adhesive solidification, otherwise use a tape with a slower solidification speed or a tape with more adhesive.

Mara tape is coated with adhesive on the base tape and usually needs to be fully dried before it can be rolled. If the tape is too wet, it will stick very tightly, it is difficult to open when used, and some cannot be used at all. For the sticker marks on the surface of hard objects, we can apply a grease-free nail polish remover on the surface of the object, and then gently wipe it with a soft cloth to ensure product quality.

Marla tapeThe composition consists of a substrate and other excipients. The auxiliary materials include hardener, reinforcing agent, diluent, filler, coupling agent, etc. Some adhesives do not necessarily contain many ingredients, depending on the nature and use of the adhesive. The film of high-quality tape is soft and has good elongation when stretched by hand. In addition, the aging of the Mara tape joint will be physically affected. Under the influence of light and heat, the adhesion of the tape surface will be reduced, the speed of exposure to the air will be faster, and the humidity and heat will be affected by the durability of the tape. Great influence.

Key words:

Characteristics and domestic market prospects of battery tape

Mara tape wholesale: how should we choose tape

Characteristics and domestic market prospects of battery tape

Mara tape wholesale: how should we choose tape